AbleNet QuickTalker 7 Quick Start Manual

Also see for QuickTalker 12: Quick start guide

AbleNet QuickTalker 7 Quick Start Manual Manual pdf 1 page image

Key Features Step 1 - Powering QuickTalker™Step 2 - Select Level Step 3 - Recording MessagesQuickstart GuideQuickTalker™ 7QuickTalker™ 12QuickTalker™ 23www.ablenetinc.coma) Entering Record ModePress and hold the RECORD button on the back of deviceuntil the red light is on, then release.Select LevelSelect LEVEL (1-5) by pressing the red button on thefront of the device.Powering QuickTalker™Turn the device to the back side. Insert 4 AA batteriesinto the device where shown. Use the On/Off switch topower the device.b) Recording MessagesPress and hold the desired message location, beginspeaking after the beep, then release. Repeat for otherlocations.Tip! Speak 6-8” from the microphone for loud, clear sound.c) Exiting Record ModePress and release the RECORD button. Lights turn off.Note: The device will automatically exit Record Modeafter 20 seconds of no activity.Level SelectionVolumeAdjustButtonsLevel IndicatorsRecording Indicator LightSymbolsOverlay +StorageFull LengthHandleIndividualMessageLocationsCore MessageLocationsSpeakerPower On/OffRecord ButtonBatteryCompartmentPower On/OffBatteryCompartmentLevel Selection Level IndicatorsRecord ButtonRecording Indicator Light