Abus RWM140 User Manual

– 32 –> 1 mRM> 20°0,5 - 1 mRMSpecial case: sloped ceilingsSpecial case: partially sloped ceilings> 20°• There are no special requirements forceilings sloped at an angle of < 20°.• In the case of ceilings sloped at anangle of > 20°, detectors should beinstalled 0.5–1 m away from thehighest point.• The instructions for fully sloped ceilingsapply for partially sloped ceilings with ahorizontal ceiling surface measuring< 1 m in width.• In the case of partially sloped ceilingswith a horizontal ceiling surfacemeasuring > 1 m, detectors should beinstalled in the centre of the horizontalsurface.RWMRWMChoosing a location