Abus SECVEST 868 Installation Instructions Manual

Contents

Abus SECVEST 868 Installation Instructions Manual Manual pdf 54 page image

54Function MeaningAccount Name The account name is defined by the downloadsoftware to guarantee a secure connection.The account name is displayed when it isentered.Connection Type Defines whether the connection is direct via USBcable or telephone.Ring to Answer If the analogue line is not used exclusively forremote maintenance, the setting defines whenthe radio alarm panel accepts the call.Answer on 1 ring If this function is enabled, the call to remotemaintenance is in two steps. The software callsthe radio alarm panel and waits for two rings.The panel now waits for a second call andaccepts this call immediately.Access mode Defines what type of connection setup is to bemade by telephone.Phone Book Enter two numbers here. One is used for securecallback.IP Network If you have fitted an Ethernet/GPRS module tothe radio alarm panel, then it is possible forDownloader to communicate with the radioalarm panel using the Internet Protocol.Secure Callback Enable this function to start connection setupby the radio alarm station.Modem Baud Rate Sets the baud rate of the modem on the PCthat performs remote maintenance.10.9.1. Account NameUse the control buttons to select Account Name. Confirm yourselection by pressing the control button under the word Select. Tocancel input, press the control button under the word Back.If you confirm Account Name with the Select button, you see thefollowing graphic display:If no account name is entered here by the software, nothing isdisplayed here.