Abus SECVEST 868 Installation Instructions Manual

Contents

Abus SECVEST 868 Installation Instructions Manual Manual pdf 9 page image

96.3 Connections in the base plateThe following figure shows the connections in the panel base plate.Number Description1 Cable clamp for the 230V AC mains lead2 Connector for connection cable3 230V AC mains connection4 Connector clamps for wired zones and outputs6.4 Blanking off non-used cable inputsUse the plastic blanks supplied to blank off the cable inputs that are notused. See next figure for fitting.6.5 Installing the base plateNow fix the base plate to the wall as shown in the next figure. Makesure the panel is installed so that the rear is not screened by hiddenmetal. Fix the panel at a height at which the user can easily read theinformation on the display.