Abus SHMK10000 Manual

Also see for SHMK10000: Quick guide

Contents

Abus SHMK10000 Manual Manual pdf 8 page image

8EnglishCPress the Tamper-button 3 times within 1.5seconds and the Status-LED on the base unitfront will flash 3 timesThe App will show if the Add device processwas successful and the Status-LED will turnoffRepeat the inclusion process from step B if itwas not successful.4.2. Mounting & InstallationATest the release behaviour at the desiredmounting position in advance.The magnet should be mounted no more than15 mm from the sensor.Note:Do not mount the detector......on or near metal surfaces!...in close proximity (< 1m) to gas, water andpower lines!...near electrical devices e.g. PC, copier orother transmittersInstallation site:Optimum mounting location for the door,window contact is the upper corner of yourwindow or door frame.B Remove the adhesive strip cover from thesensor and magnets and attach it to thedesired mounting position.The magnet can be mounted to the right orleft of the sensor.