Accent TM Hardware Manual Accent TM 1200-10 Hardware Manual 32• Plug in the battery charger.• If the indicator lights on the front of the case are not glowing, press the ON button.• When the device is working again, replace both battery doors. If the device is still not working, see the Restoring Windows instructions below.Restoring WindowsIMPORTANT: The following instructions are for Accent devices that have the integrated optionenabled and can access Windows. If your Accent is a dedicated device and cannot access Windows,contact the PRC Service Department at (800) 262-1990 for restore instructions. IMPORTANT NOTE: The restore process will erase everything on the device's hard drive.Including internet access, programs, and hardware drivers.Before restoring the device, call the PRC Service Department at (800) 262-1990.Outside the U.S., call your local PRC distributor.The restore process generally takes anywhere from 30 minutes to an hour. It is recommendedthat the restore process be monitored from the time it begins through its completion.• Plug in the battery charger.• Pull the Windows Charms menu from the right side of the display.• Select Settings.• Select Change PC Settings in the lower right corner of the menu.• Select General from the PC Settings menu on the right side of the screen.• On the right side of the screen, scroll down to Remove everything and reinstall Windows• Select Get Started.• A blue screen appears explaining the next steps in t the procedure. Select Next.• A blue screen appears with the following options: “Just remove my files” and “Fully clean thedrive.” Select “Just remove my files.”The “Fully clean the drive” option may take 2.5 hours to complete and is not necessary.• Another blue screen appears stating that Windows is ready to reset the computer. Select Resetto continue or Cancel to stop the restore process.When the Restore is Complete• Follow the Windows Setup and Customizing instructions that appear on the screen.