Chapter 8 Reference 127Function buttonsThe buttons labeled [F1], [F2] and [F3] in the center of theAcclaim300 console are function buttons. Their purpose varies depending onthe operation you are performing. The LCD Operator Displayimmediately above the function buttons identifies their use.ExamplePress [Setup]. Display reads:Setup UtilityDISK PRINTCONFIGPress [F1] (Diskette) to access diskette options.Press [F2] (Print) to access print options.Press [F3] (Config) to access patch and console setup options.GrandmasterThe Grandmaster controls the intensity level of allAcclaim 300 output.It overrides all other controls except black out. See page for moreinformation on black out.Normally, the Grandmaster is set at 10 (100 percent) so that allchannels operate at 100 percent of their set levels. When theGrandmaster is set at a level less than 10, channel output equalscurrent settings multiplied by the percentage level at which theGrandmaster is set. For example, if a submaster is set at 50 percent,and the Grandmaster is also set at 50 percent, the channels outputs at25 percent of their recorded intensity.The numbers next to the Grandmaster indicate the output level atwhich the slider is set. Numbers represent the percentage ofmaximum output divided by 10. For example, if a slider is set at 5, theGrandmaster is set at an output level that is 50 percent.www.carlosmendoza.com.mx
