Chapter 2 Installation 11Installing monitorAcclaim 300 supports an optional monochrome monitor. The monitoruses a standard TTL interface via a 9-pin D connector. AC power forthe monitor is available through an auxiliary receptacle on theconsole's back panel labeled AC Out.To install the monochrome monitor, follow these steps:1. Make sure the console and monitor are both turned Off.2. Insert the monitor power cord into the connector labeled AC Outon the back panel.Warning: If you do not use the AC Out connector on the console'sback panel you must not turn the monitor on until after you haveconnected it to the console.3. Insert the video cable into the connector labeled MonochromeCRT on the back panel.4. Turn console On.5. Turn monitor On.6. Press [Setup]. Display reads:Setup UtilityDISK PRINT CONFIG7. Press [F3] (Config); display reads:Select Setup DesiredPATCH CONSOLE QUITwww.carlosmendoza.com.mx
