Acco Europe nobo s28 Instruction Manual
                                                    | |
Contents
| 
3 EnglishInstallationWarning Indicator When the “LAMP” indicator lights red (“POWER” indicatorflashes red), the projector will automatically shut down. When the “TEMP” indicator lights red (“POWER” indicatorflashes red), it indicates the projector has overheated. Theprojector will shut down automatically.Under normal conditions, the projector can be switched onagain after it has cooled down. When the “TEMP” indicator flashes red (“POWER” indicatorflashes red), it indicates the fan has failed.Powering Off the Projector. Press the “POWER” button to turn off the projector lamp.The following message will be displayed on the screen.Press the “POWER” button again to confirm, otherwisethe message will disappear after 5 seconds.When you press the “POWER” button a second time, thesystem will show the countdown timer on the screen.2. The cooling fans continue to operate for about 0 secondsfor cooling cycle. When the Power LED turns Red, theprojector has entered standby mode.If you wish to turn the projector back on, you must waituntil the projector has completed the cooling cycle andhas entered standby mode. Once in standby mode, simplypress “POWER” button to restart the projector.3. Disconnect the power cord from the electrical outlet andthe projector.4. Do not turn on the projector immediately following a poweroff procedure. |
Related manuals for Acco Europe nobo s28
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine