Acco Europe nobo s28 Instruction Manual
                                                    | |
Contents
| 
2EnglishUsage Notice When the lampreaches the endof its life, theprojector willnot turn back onuntil the lampmodule hasbeen replaced.To replace thelamp, followthe procedureslisted under“Replacing theLamp” sectionon pages 43-44.PrecautionsPlease follow all warnings, precautions andmaintenance as recommended in this user’sguide.▀■ Warning- Do not look into the projector’s lens when the lamp ison. The bright light may hurt your eyes.▀■ Warning- To reduce the risk of fi re or electric shock, do notexpose this projector to rain or moisture.▀■ Warning- Please do not open or disassemble the projector asthis may cause electric shock.▀■ Warning- When replacing the lamp, please allow the unit tocool down. Follow instructions as described on pages43-44.▀■ Warning- This projector will detect the life of the lamp itself.Please be sure to change the lamp when it showswarning messages.▀■ Warning- Reset the “Lamp Reset” function from the on-screendisplay “Options|Lamp Settings” menu after replacingthe lamp module (refer to page 37).▀■ Warning- When switching the projector off, please ensurethe cooling cycle has been completed beforedisconnecting power. Allow 90 seconds for theprojector to cool down.▀■ Warning- Do not use lens cap when projector is in operation.▀■ Warning- When the lamp is approaching the end of its lifetime,the message “Lamp Warning: Lamp life exceeded.”will show on the screen. Please contact your localreseller or service center to change the lamp as soonas possible. |
Related manuals for Acco Europe nobo s28
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine