5Storage and Shipping ConditionsDo not expose the scale to shocks, vibrations, moisture orextreme temperatures.Unpacking the ScaleAfter unpacking the scale, check it immediately for anyvisible damage as a result of rough handling duringshipment.Note:– The display and control unit is attached to the weighingplatform via a cable.– If you see any sign of damage, proceed as directed in thechapter entitled “Care and Maintenance,” under thesection on “Safety Inspection.”– Save the box and all parts of the packaging until youhave successfully installed your scale. Only the originalpackaging provides the best protection for shipment.Before packing your scale, unplug all connected cables toprevent damage.Equipment SuppliedThe equipment supplied includes the components listedbelow:– Scale with attached display and control unit– Load pan– Installation and operating instructionsInstallation InstructionsThe Acculab Exceleron scales are designed to providereliable weighing results under normal ambient conditions.When choosing a location to set up your scale, observe thefollowing so that you will be able to work with addedspeed and accuracy:– Set up the scale on a stable, even surface– Avoid placing the scale in close proximity to a heater orotherwise exposing the scale to heat or direct sunlight– Protect the scale from drafts that come from open windowsor doors– Avoid exposing the scale to extreme vibrations duringweighing– Protect the scale from aggressive chemical vapors– Do not expose the scale to extreme moisture over longperiodsConditioning the ScaleMoisture in the air can condense on the surfaces of a coldscale whenever it is brought into a substantially warmerplace. If you transfer the scale to a warmer area, makesure to condition it for about 2 hours at room temperature,leaving it unplugged from AC power. Afterwards, keep thescale continuously connected to AC power.Getting Started