33P4.3 Selecting Automatic or Manual Temperature CompensationThis feature lets you select between Automatic Temperature Compensation (ATC)and Manual Temperature Compensation. Meter default is ATC.From measurement mode1. Press Setup key to enter Set Up mode.2. Press the s and t keys to scrollthrough subgroups until you viewparameter P4.0.See figure3. Press the ENTER key three times toselect parameter 4.3. The upper displayshows “ATC” and the lower displayshows “P4.3”.See figure4. Press the ENTER key again. The upperdisplay shows “ATC” and the lowerdisplay shows “YES” or “NO”.See figure5. Press the s and t keys to select theAutomatic Temperature Compensationon of off.• YES = ATC on• NO = ATC off6. Press the ENTER key to confirmselection and to return to the subgroupmenu. Press the CAL/MEAS key toreturn to measurement mode.EEFFGG