109Salinity SetupXL20, 30, 50 and 60 metersTo Set Alarm LimitsThis option allows you to set alarm limits for the salinity measuring mode. If the salinity value ofthe measurement is outside of the boundaries set by the minimum and maximum limits, audibleand visual warnings will let you know that your sample measurement was outside of the setlimits.The Alarm Limit can be set from 0 to 90.000 ppt.To set Alarm Limits1. Touch ON or OFF to set the status of the alarm of salinity mode2. Touch the Low box and use numeric keypad to enter the new limit values.3. Touch Enter on the keypad to accept this limit and return to the salinity Setup screen.4. Touch the High box and use numeric keypad to enter the new limit values.5. Touch Enter on the keypad to accept this limit and return to the salinity Setup screen.To Set Print CriteriaThis screen allows you to select which criteria are printed with the measurement when you printthe data. The status of the current print criteria is displayed on the screen. The criteria option isactive if ON appears to the right of the option. It is inactive if OFF appears to the right of theoption. Any active criteria will be printed on demand.The Salinity Print Criteria is set the same way as previously described in Conductivity Setup.See ‘Conductivity Setup: Set Print Criteria’ section for instructions.
