Accurex XRRS Installation, Operation And Maintenance Manual

Also see for XRRS: Installation, operation and maintenance manual

Accurex XRRS Installation, Operation And Maintenance Manual Manual pdf 12 page image

12 Fire Ready HoodMain Control Power1. Determine mounting location of the appliancedisconnect (contactor box and/or gas valve) andmounting bracket, if not already done.2. Run factory-provided wire from junction boxthrough the wall to the appliance disconnect,unless ClockBox option is provided. For electricalinstallation information regarding the ClockBox, referto page 16. Wire the factory-provided 110 VAC mainpower connection to a 15 amp rated circuit.3. If the hood unit is to be linked to a fire alarm system,accommodations for those wires will need to bemade at this time as well. Refer to fire alarm electricalinstallation information on page 14.CAUTIONElectrical installation should be performed by alicensed electrician. Installation should be performedaccording to all applicable codes and regulations. Shutoff power at the main breaker to prevent electricalshock when accessing electrical connections.All field installation and wiring of electrical equipmentmust be done to meet NEC and local codesElectrical InstallationRange Supply Line208-220 VAC 50A maxsupplied by othersHood Supply 110-120 VAC 15AMetal clad wire from 110-120 VAC supply line12/2 8 ft length, marked with red tapesupplied by AccurexRun metal clad wire from junction box on mountingplate to power disconnect box through wallMetal clad wire from 110-120 VAC supply line14/2 8 ft length, marked with black tapesupplied by AccurexPower disconnect mounted flush to wall50A 250V NEMA 14-50 receptaclesupplied by AccurexPower disconnect mounted flush to wall50A 250V NEMA 14-50 receptaclesupplied by AccurexJunction Boxwith ConnectorJunction Boxwith ConnectorAlarm Wire(s)NO/NC Local and Remote Alarmby othersAlarm Wire(s)NO/NC Local and Remote Alarmby others