ARMC2ConfigApp, ContinuedNetwork Configuration TabThe Network Configuration tab allows you to change the way the ARMC/2 card connectsto the network. By default, the ARMC/2 card obtains an IP address dynamically viaDHCP. You can change this by specifying the IP address, network mask, and gateway.The Network Configuration fields are explained below:Field/ Button DescriptionMAC Address The MAC Address field displays the current MAC and PHY unique hardwareaddress.Configuration Method The Configuration Method buttons allows you to select the network configurationmethod. You can choose either Obtain IP address automatically (DHCP) or Usethe following IP address (STATIC) method.IP Address The Internet Address field allows you to specify a new IP address when you use aSTATIC configuration method.Subnet Mask The Network Mask field allows you to specify a new network mask when you usea STATIC configuration method.Gateway The Gateway field allows you to specify a gateway when you use a STATICconfiguration method.Apply Button The Apply button allows you to save your New Network Configuration.Exit Button The Exit button allows you to log off the ARMC/2 Card Configuration program.Cont’dARMC/2 User’s Guide118
