Appendix E Serial Over LANHardware SetupYou can use an external serial port connector and null modem cable to setup theARMC/2 to perform Serial over LAN operations. To do this, you must have an external9-pin serial port connector and cable plugged into the ARMC/2 card’s serial portconnector at JP2. Once the external 9-pin serial port connector is installed and secured tothe chassis, attach the null modem cable as illustrated below:MegaRAC G3(I/O shield view) MegaRAC G3 external9-pin serial port connectorThe USB cable must be connectedfrom the MegaRAC G3's USB portto the host system's USB portThe null modem cable must beconnected from the MegaRAC G3's externalserial port connector to the host system'sexternal serial port connectorUSBHost system'sUSB portHost system'sexternal serialportCont’dAppendix E : Serial Over LAN 137
