User’s Guide96Press t or s to select the logical drivewhere the Local Spare Drive will beassigned to, then press ENT for twoseconds.The message “Add Local Spare DriveSuccessful” will be displayed on the LCD.Adding Global Spare DrivePress ENT for two seconds to enter theMain Menu. Press t or s to select "Viewand Edit SCSI Drives", then press ENT.lSCSI drive information will be displayedon the LCD. Press t or s to select aSCSI drive that has not been assigned toany logical drive yet, then press ENT.Press t or s to select “Add GlobalSpare Drive”, then press ENT.Press ENT again for two seconds to addthe spare drive. The message “AddGlobal Spare Drive Successful” will bedisplayed on the LCD.Identifying a DrivePress ENT for two seconds to enter theMain Menu. Press t or s to select "Viewand Edit SCSI Drives", then press ENT.View and EditSCSI Drives ◊View and EditSCSI Drives ◊C=1 I=0 1010MBNEW DRV SEAGATELG0 RAID5 DRV=32012MB GD SB=0Add Global SpareDrive ..Add Local SpareDrive SuccessfulAdd Global SpareDrive Successful
