Indexcxiii4.7 Boot OptionsThis option allows you to specify your preferred setting for boot-up.The following screen appears if you select Boot Options from the BasicConfiguration menu:Boot OptionsBoot Sequence1st [Floppy Disk]2nd [IDE CD-ROM ]3rd [Hard Disk ]4th [LANDesk Service Agent]First Hard Disk Drive .................[ SCSI]Fast Boot .............................[Auto]Silent Boot ...........................[Disabled]Num Lock After Boot ...................[Enabled]Memory Test ...........................[Disabled]Release All Blocked Memory ............[Disabled]*Configuration Table ...................[Enabled]Boot from LanDesk Service Agent .......[Disabled]The above parameter marked with ‘*’ will onlyappear if you access the Advanced Options levelin the Main Menu. Please refer to section 2.1 formore information.4.7.1 Boot SequenceThis parameter allows you to specify the boot search sequence during POST.• 1st. The system checks this drive first.• 2nd. The system then checks this drive if it can not boot from the1st specified drive.• 3rd. If the 1st and 2nd searches fail then it boots from this drive.• 4th. If the 1st, 2nd , and 3rd searches fail then it boots from this drive.BIOS will display an error message if the drive(s) specified is not bootable.
