Altos 12000 Series User’s GuideAdvanced Configuration OptionsWhen you select Advanced Configuration Options, a screen similar to the figurebelow appears. Do not change these options unless absolutely necessary.Arrow keys to move cursor, to select option, to exit ( =default)Adaptec AIC-7896 SCSISelect (TM) UtilityAIC-7896 at Bus:Device 01:06hConfigurationSCSI Bus Interface DefinitionsHost Adapter SCSI ID ................................... 7SCSI Parity Checking.................................... EnabledHost Adapter SCSI Termination.................... Low ON/High ONAdditional OptionsBoot Device Options...................................... Press SCSI Device Configuration............................ Press Advanced Configuration Options................... Press - Reset to Host Adapter Defaults*Advanced Configuration OptionsReset SCSI BUS at IC Initialization ....................................................................DisabledDisplay Message During BIOS Initialization ..........................................EnabledExtended BIOS Translation for DOS Drives > 1Gbyte ........................................EnabledVerbose/Silent Mode............................................................................................Verbose--------------Options Listed Below Have NO EFFECT if the BIOS is Disabled--------------Host Adapter BIOS..............................................................................................EnabledSupport Removable Disks Under BIOS as Fixed Disks ......................................Boot OnlyBIOS Support for Bootable CD-ROM ..................................................................EnabledBIOS Support for Int13 Extensions......................................................................EnabledFigure 5-9 Advanced Configuration Options ScreenUse the cursor keys (↑ ↓) to move between options. Press Enter to display a pop-up menu with a selection of options. Use the cursor keys (↑ ↓) to select an option,and press Enter to make your selection.
