Altos 12000 Series User’s Guide4.2.10 IDE Secondary Channel SlaveThis parameter specifies the current configuration of the IDE device connected tothe slave port of the secondary IDE channel. The default setting is None.4.2.11 Total MemoryThis parameter specifies the total amount of onboard memory. The memory sizeis automatically detected by BIOS during the POST. If you install additionalmemory, the system automatically adjusts this parameter to display the newmemory size.1st Bank/2nd Bank/3rd Bank/4th BankThe 1st Bank, 2nd Bank, 3rd Bank, and 4th Bank parameters indicate the type andsize of DRAM installed in DIMM sockets 1, 2, 3, and 4 respectively. The Nonesetting indicates that there is no DRAM installed.4.2.12 Serial Port 1This parameter shows the serial port 1 address and IRQ setting. The defaultsetting is 3F8h, IRQ 4.4.2.13 Serial Port 2This parameter shows the serial port 2 address and IRQ setting. The defaultsetting is 2F8h, IRQ 3.4.2.14 Parallel PortThis parameter shows the parallel port address and IRQ setting. The defaultsetting is 378h, IRQ 7.
