15 Altos G5450 Installation Configuration GuideOnboard GigabitEthernet 67.80.0.0 EasyBUILD 8.0 build 200 (or later)Onboard VGA 6.14.10.1090 EasyBUILD 8.0 build 200 (or later)ATI FireGL V5600 8.440.0.0 EasyBUILD 8.0 build 200 (or later)Software RequiredThe management utility for onboard SATA RAID and NIC can be found in theEasyBUILD 8.0 build 200 (or later).Software Version Directory on EasyBUILDOnboard SATARAID Utility 10.3.51.1 EasyBUILD 8.0 build 10.3.51.1 200 (orlater)ForceWare NetworkAccess Manager 67.80.0.0 EasyBUILD 8.0 build 200 (or later)Configuring onboard SATA RAIDPlease refer to the Appendix A. for the onboard SATA RAID configuration.Installation Tips1. Though Windows Server can recognize the onboard SATA RAID, we stillreplace the driver with the one in EasyBUILD. Please make the driverdiskette from the EasyBUILD 8.0 build 200 first before the installation.2. Please boot the system form the Windows Server 2008 x64 CD/DVD.Follow the instructions to do the installation.3. When you see the “Where do you want to install Windows?” on thescreen, please insert the driver diskette and click on Load Driver.4. Click on OK. You will see the NVIDIA nForce RAID Controller(A:\nvrd64.inf), NVIDIA nForce RAID Device (A:\nvrd64.inf) and NVIDIAnForce Serial ATA Controller (A:\nvrd64.inf) listed.5. Please hold the ctrl key to select all of listed driver and click on Next toload the driver.6. After the driver is loaded and returned to “Where do you want to installWindows?” page, click on Next to continue the installation.7. Follow the instructions to finish the installation.Chipset Driver InstallationPlease refer to the Windows Server 2008 Enterprise x64 Edition (LSI MegaRAIDSAS 8708ELP) Chipset Driver Installation section.Gigabit Ethernet Driver InstallationThe Gigabit Ethernet driver is included in the chipset driver package. TheGigabit Ethernet driver will be installed automatically when you installing thechipset driver package.
