Acer Altos G5450 Installation & Configuration Manual

Also see for Altos G5450 Series: User guide

Contents

Acer Altos G5450 Installation & Configuration Manual Manual pdf 71 page image

59 Altos G5450 Installation Configuration GuideOnboard NVIDIAnForce NetworkingController65.3.1.0 Including in chipset driver package9.21Onboard XGI Z9s 6.14.10.1080 \Disk\g5450\onboard\xgiz9s\wsxp\ATI FireGL V5200 8.323.1.0 \Disk\g5450\graphic\V5200\wsxp\Software RequiredThe management utility for LSI MegaRAID SAS 8708ELP can be found in theEasyBUILD 7.1 build 600 (or later).Software Version Directory on EasyBUILDMegaRAID StorageManager2.07-00 app\g5450\sas\8204ELP\Windows\ForceWare NetworkAccess Manager65.31 Including in chipset driver package9.21Configuring LSI MegaRAID SAS 8708ELPPlease refer to the Appendix B. for the LSI MegaRAID SAS 8708ELPconfiguration.Installation Tips1. As Windows XP can’t recognize the LSI MegaRAID SAS 8708ELP, you needto make a driver diskette from the EasyBUILD 7.1 build 600 first beforethe installation.2. Press F6 at the start of installation to provide the driver disk for the LSIMegaRAID SAS 8708ELP.3. Select “LSI Logic MegaRAID SAS RAID Controller Driver (Windows XP)” astarget driver4. After loading the RAID driver from diskette, follow the normal procedureto finish the installation.Chipset Driver Installation1. After the installation completes, you would see the following deviceswith yellow mark in Device Manager.