Altos G5450 Installation Configuration Guide 263. Expand Drivers -> Altos G5450 -> Chipset, select Windows Server 2003 x64and click on Setup.4. Follow the instruction and use the default setting to install all of thedrivers and utilities in the driver package.5. After all drivers and utilities are installed, please reboot the system.Gigabit Ethernet Driver InstallationThe Gigabit Ethernet driver is included in the chipset driver package. TheGigabit Ethernet driver would be installed automatically when you installingthe chipset driver package.VGA Driver Installation (onboard XGI Z9s)1. Windows will treat onboard VGA as Standard VGA device. You can findthe XGI Z9s driver in EasyBUILD 7.1 build 600. Please insert the EasyBUILD7.1 build 600 into the optical drive.2. Expand Drivers -> Altos G5450 -> Graphics adapters -> XGI Z9s, selectWindows Server 2003 x64 and click on Setup.3. Click on Display Driver and follow the instruction to install the VGA driver.4. Please reboot the server after the driver is installed.5. After the system rebooted, you would see XGI Z7/Z9/Z9s v1.08.03 listed inDisplay adapters in Device Manager.VGA Driver Installation (ATI FireGL V5200)NOTE. With ATI FireGL V5200 installed, the onboard VGA still can work assecondary VGA output. After you install the ATI FireGL V5200 driver, you stillneed to install the XGI Z9s driver.1. You will see two Standard VGA Graphics Adapter under Display Adapterand one Video Controller under Other Device in Windows Server 2003Device Manager for both ATI FireGL V5200 and XGI Z9s.