14FotoPrisaMedia TypeYou can choose between Photo Paper, Sticker (4x4) and Sticker(Single) in this item. If you use photo paper or postcard forprinting, choose "Photo Paper". If you are printing images onstickers, please choose "Sticker (4x4)" or “Sticker (Single)”.If you choose "Photo Paper" as the media, you can tile(see above) the image in 1, 4 or 16 on the paper, andthe paper can be loaded either manually orautomatically. However, if you choose "Sticker (4x4)"as the media, only "16" is applicable in the "Tile"option and you can only load the sticker manually.SourceSelect the paper source of the printer: Auto-Feed Cassette orManual Feed. You can choose to load the paper automatically(from the paper cassette) or manually (from the manual paperfeeding slot).If "Sticker (4x4)” and “Sticker (Single)" is chosen in"Media type", only "Manual Feed" is applicable.ResolutionYou can choose either 300x300 dpi or 300x600 dpi as theprinting resolution. Higher resolution creates image with betterquality.When “Resolution” is set to “300x600 dpi, the“Orientation” is unchangeable in Preview Window. Forparallel port model, you will have to set the transfermode to ECP to use the resolution of 300x600 dpi. Fordetails, please see page 43 in Chapter 5.