44FotoPrisa5.1.4 USB port settings (For FotoPrisa 300U)The FotoPrisa 300U Printer is connected to your computer viaUSB port. USB is short for Universal Serial Bus, a connectioninterface capable of transmitting signal at 12Mbit per second.Besides, it is a real plug-and-play interface type, which meansthat you don’t have to power on a USB device before you turnon your computer to use it. Whenever you want to use a USBdevice, simply power on the device and your computer willdetect it automatically.However, it takes the hardware and software support of yourcomputer to use a USB device. That is, you need to have a USBport in your computer running USB-support operating system.Besides, you will need to enable the USB port in your systemBIOS (Basic Input/Output System) if it is not enabled.To enable the USB port in your system BIOS:1. Follow the instructions described in the 5.1.3 to enter theBIOS of your computer.2. According to the BIOS you use, set the "USB Interface" fieldunder "Peripheral Configuration" or "Advanced Setup" or"PCI Control" to “enabled”.3. Save the change and exit BIOS.4. For details, we recommend that you consult the documentof instructions that comes with your computer, as impropersetting changes made to the BIOS will result in malfunctionof your computer.