Acer FotoPrisa 300P User Manual
                                                          | |
Contents
| 
40FotoPrisa1. Get the right imageIf you are using a digital still cameraIt’s better to choose the camera with aspects ratio of 4:3, like640 x 480 (minimum requirements bigger than 600 x 450),800 x 600, 1024 x 768…, etc.Then download to the PC to save as appropriate file in theimage-editing program (such as Photo Express). If the aspectratio is not exactly 4:3, use to the Crop function to removethe longer side as to fit the ration of 3 to 4.If you are using a scanner (you already have a 2” x 1.5”photo on hand)Select only the part of the whole ID photo and do the scanningat 300dpi. Of course, the real ID photo usually has an aspectratio slightly deviated from 4:3.To adopt the scanned image within the range of 2” x 1.5”,adjust the dimension of the relatively longer side (compared tothe standard ratio 4:3) to either 2” or 1.5” by fixing theresolution at 300dpi. Then we got a similar dimension of imagefor the ID photo printout.2. Arrange the 6 tiled ID photos on one photo paperIf the “Tile” function is available like in the options of Print inPhoto Express, just choose “Landscape” as orientation and set 2Rows and 3 columns, then click “Print”. It’s so easy tomake 6 ID photos!If in other programs, please open a new image file of1250 pixels x 1500 pixels, same as the maximum printarea. Then use Copy and Paste functions to make anew image with 6 ID photos just like shown in theillustrative figure. Then save it to your album! And fromthat on every time you need to develop new ID photos,just load the file and print, then it’s done!BAA : B = 4 : 3 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine