19 Altos G330 Installation Configuration Guide3. Follow the instructions to finish the onboard SATA RAID monitor utilityinstallation.Intel PROSet Utility InstallationThe PROSet Utility installation is the same as onboard Intel SATA RAID enabled.Please refer to the Windows Server 2003 Enterprise Edition (with onboard IntelSATA RAID) Intel PROSet Utility Installation section.Windows Server 2003 Enterprise Edition SP1 (with Adaptec SAS44300 HostRAID)Below information describes how to manually install Windows Server 2003Enterprise Edition on Altos G330 with Adaptec SAS 44300 HostRAID.Drivers RequiredFor Windows 2003 Installation, the following device drivers are required.Device Version Directory on Resource CDOnboard ATIES10008.24.3.0 \Disk\G330\onboard\VGA\WS03\Setup.exeOnboard Intel 3000Chipset8.1.0.1002 \Disk\G330\onboard\chipset\Setup.exeAdaptec SAS 44300 1.2.5902.0 \Disk\G330\SAS\Adaptec\44300.netOnboard Intel82573E GigabitEthernet9.5.12.0 \Disk\G330\NIC\Intel\pro1000.netOnboard iAMT 5.1.2600.2180 \Disk\G330\onboard\iAMT\ws03Onboard USB 2.0 7.2.2.1007 Included in Intel 3000 Chipset driverSoftware RequiredThe management utility of add-on Adaptec 44300 SAS card can be found in theG330 Resource CD build 100(or later).Software Version Directory on Utility and Manual CDAdaptec StorageManager4.30.01(16042)\APP\G330\SAS\Adaptec\Windows\ws03\setup.exeIntel PROSet Utility 11.1.0.19 \APP\G330\NIC\prosetdx\ws03\DxSetup.EXEConfiguring Adaptec SAS 44300 HostRAIDPlease refer to the Appendix C. for the Adaptec SAS 44300 HostRAIDconfiguration.Installation Tips1. As Windows Server 2003 can’t recognize the Adaptec 44300 SAS card, youneed to make a driver diskette from the resource CD first before theinstallation.