Altos G330 Installation Configuration Guide 22VGA Driver InstallationThe VGA driver installation is the same as onboard Intel SATA RAID enabled.Please refer to the Windows Server 2003 Enterprise Edition (with onboard IntelSATA RAID) VGA Driver Installation section.Gigabit Ethernet Driver InstallationThe Gigabit Ethernet driver installation is the same as onboard Intel SATA RAIDenabled. Please refer to the Windows Server 2003 Enterprise Edition (withonboard Intel SATA RAID) Gigabit Ethernet Driver Installation section.iAMT Driver InstallationThe iAMT driver installation is the same as onboard Intel SATA RAID enabled.Please refer to the Windows Server 2003 Enterprise Edition (with onboard IntelSATA RAID) iAMT Driver Installation section.MegaRAID Storage Manager Installation1. Please insert G330 Resource CD into the optical drive.2. Select Utilities, expand Utilities -> Altos G330 -> LSI Logic MegaRAID SAS8204ELP, select MegaRAID Storage Manager (Windows Server 2003) andclick on Setup.3. Follow the instruction, accept the license agreement and use the defaultsetting to the Setup Type.4. At Setup Type, please select StandAlone.5. Follow the instruction again to complete the installation.Intel PROSet Utility InstallationThe PROSet Utility installation is the same as onboard Intel SATA RAID enabled.Please refer to the Windows Server 2003 Enterprise Edition (with onboard IntelSATA RAID) Intel PROSet Utility Installation section.Windows 2000 Advanced Server SP4 (with onboard Intel SATARAID)Below information describes how to manually install Windows 2000 on AltosG330 with onboard Intel SATA RAID.Drivers RequiredFor Windows 2000 Installation, the following device drivers are required.Device Version Directory on Resource CDOnboard ATIES10008.24.3.0 \Disk\G330\onboard\VGA\WS2K\Setup.exeOnboard Intel 3000Chipset8.1.0.1002 \Disk\G330\onboard\chipset\Setup.exe
