2-22 User’s Guide2.6 Power ManagementThe Power Management menu allows you to configure the systempower-management feature.The following screen shows the Power Management parameters andtheir default settings:Power ManagementPower Management Mode .............. [Enabled]IDE Hard Disk Standby Timer ...... [Off]System Sleep Timer ............... [Off]Sleep Mode ..................... [----]Power Switch < 4 sec. . ............ [Suspend]System Wake-up EventModem Ring Indicator ............. [Enabled]2.6.1 Power Management ModeThis parameter allows you to reduce power consumption. When thisparameter is set to Enabled, you can configure the IDE hard disk andsystem timers. Setting it to Disabled deactivates thepower-management feature and its timers.IDE Hard Disk Standby TimerThis parameter allows the hard disk to enter standby mode afterinactivity of 1 to 15 minutes, depending on your setting. When youaccess the hard disk again, allow 3 to 5 seconds (depending on thehard disk) for the disk to return to normal speed. Set this parameter toOFF if your hard disk does not support this function.
