2-36 User’s Guide2.10 System SecurityThe Setup program has a number of security features to preventunauthorized access to the system and its data.The following screen appears if you select System Security from theMain menu:System SecuritySetup Password ............... [None]Power-on Password ............ [None]Operation Mode ............. [Normal]Disk Drive ControlFloppy Drive ............... [Normal]Hard Disk Drive ............ [Normal]2.10.1 Setup PasswordThe Setup Password prevents unauthorized access to the BIOS utility.To set or change a Password:1. Make sure that JP3 is set to 2-3 (bypass password). See figure 1-2 for the location of JP3.You cannot enter the BIOS utility if a Setuppassword does not exist and JP3 is set to 1-2(password check enabled).By default, JP3 is set to 2-3 (Bypass password).
