Setup Utility 2-23System Sleep TimerThis parameter sets the system to the lowest power-saving mode after aspecified period of inactivity. Any keyboard or mouse action or anyactivity detected from the IRQ channels resumes system operation.SLEEP MODEThis parameter lets you specify the power-saving mode that the systemwill enter after a specified period of inactivity. The options are Standbyand Suspend modes.This parameter becomes configurable only if the System Sleep Timer isenabled. Any keyboard or mouse action, or any enabled monitoredactivities occurring through the IRQ channels resume system operation.2.6.2 Power Switch < 4 sec.When set to Power Off, the system automatically turns off when thepower switch is pressed for less than 4 seconds. When set toSuspend, the system enters the suspend mode when pressed for lessthan 4 seconds.2.6.3 System Wake-up EventThe system wake-up event allows the system to resume operation whenthe modem ring indicator is enabled.Modem Ring IndicatorWhen Enabled any fax/modem activity wakes up the system fromsuspend mode. The default setting is Enabled.
