Acer Projector User Manual

Also see for PD100: Quick start guide Service guide Service manual Service manual Quick start guide

Acer Projector User Manual Manual pdf 2 page image

2English ...Usage NoticePrecautionsFollow all warnings, precautions and maintenance as recommended in thisuser’s guide to maximize the life of your unit.Warning- Do not look into the projector’s lens when the lamp ison. The bright light may hurt your eyes.Warning- To reduce the risk of fire or electric shock, do notexpose this product to rain or moisture.Warning- Please do not open or disassemble the product as thismay cause electric shock.Warning- When changing the lamp, please allow unit to cooldown, and follow all changing instructions.Warning- This product will detect the life of the lamp itself.Please be sure to change the lamp when it showswarning messages.Warning- Reset the “Lamp Hour Reset” function from the OnScreen Display “Management” menu after replacingthe lamp module (refer to page 26)Warning- When switching the projector off, please ensure theprojector completes its cooling cycle beforedisconnecting power.Warning- Turn on the projector first and then the signalsources.Warning- Do not use lens cap when projector is in operation.Warning- When the lamp reaches the end of its life, it will burnout and may make a loud popping sound. If thishappens, the projector will not turn back on until thelamp module has been replaced. To replace the lamp,follow the procedures listed under “Replacing theLamp”.