Acer Projector User Manual
Also see for PD100: Quick start guideService guideService manualService manualQuick start guide
                                   | |
Contents
| 
33 ... EnglishReplacing the lampThe projector will detect the lamp life itself. It will show youa warning message “Lamp is approaching the end of its usefullife in full power operation. Replacement Suggested!” Whenyou see this message, changing the lamp as soon as possible.Make sure the projector has been cooled down for at least 30minutes before changing the lamp.Warning: Lampcompartment is hot!Allow it to cool downbefore changing lamp!Warning: To reducethe risk of personalinjury, do not drop thelamp module or touchthe lamp bulb. The bulbmay shatter and causeinjury if it is dropped.1 342Lamp Changing Procedure:1. Turn the power off the projector by pressing the Powerbutton.2. Allow the projector to cool down at least 30 minutes.3. Disconnect the power cord.4. Use a screwdriver to remove the screw from the cover.5. Push up and remove the cover. 6. Remove the 2 screws from the lamp module.7. Pull out the lamp module. To replace the lamp module, reverse the previous steps.Appendices |
Related manuals for Acer PD100
manualsdatabase
Your AI-powered manual search engine