16English Restore Windows from backup discsNote: This feature is only available on certain models.To restore Windows from your previously burned backup discs, you will need toinsert the first backup disc and enable the F12 Boot Menu via the BIOS SetupUtility.1 Turn on your computer and insert the first system recovery disc into theoptical disc drive. Restart your computer.2 During startup when the Acer logo shows, press the F2 key to enter BIOSSetup, where you can set system parameters.3 Use the left and right arrow keys to select the Main submenu.4 Use the up and down arrow keys to select F12 Boot Menu.5 Use the F5 or F6 key to change F12 Boot Menu to Enabled.6 Press the ESC key to enter the Exit submenu, press the ENTER key to ExitSaving Changes. Press the ENTER key again to select Yes. The system willreboot.7 After rebooting, when the Acer logo shows, press the F12 key to open theBoot Menu. Here you can select which device to boot from.8 Use the arrow keys to select the IDE1*, then press the ENTER key. Windowswill be installed from the recovery disc.9 Insert the second recovery disc when prompted, then follow the onscreenprompts to complete the restore.10 Remove the recovery disc from the optical drive once the restore iscomplete. Do this before rebooting your computer.
