Chapter 2 29MainThe Main screen allows the user to set the system time and date as well as enable and disable boot optionand recovery.NOTE: The screen above is for your reference only. Actual values may differ.The table below describes the parameters in this screen. Settings in boldface are the default and suggestedparameter settings.Parameter Description Format/OptionSystem Time Sets the system time. The hours are displayed with 24-hourformat.Format: HH:MM:SS(hour:minute:second)System Date Sets the system date. Format MM/DD/YYYY(month/day/year)System Memory This field reports the memory size of the system. Memory sizeis fixed to 3071 MB.N/AExtendedMemoryThis field reports the Extended Memory size.Memory size is fixed to 4094 MB.N/AVideo Memory Shows the video memory size. VGA Memory size=32 MB N/AQuiet Boot Displays the logo screen while booting. Option: Enabled orDisabledNetwork Boot Enables, disables the system boot from LAN (remote server). Option: Enabled orDisabledF12 Boot Menu Enables, disables Boot Menu during POST. Option: Disabled orEnabledD2D Recovery Enables, disables D2D Recovery function. The function allowsthe user to create a hidden partition on hard disc drive to storeoperation system and restore the system to factory defaults.Option: Enabled orDisabledSATA Mode Control the mode in which the SATA controller should operate. Option: AHCI Modeor IDE ModePhoenixBIOS Setup UtilityInformation Main Advanced Security Boot Power ExitItem Specific HelpSystem Time [13:04:04] , , orSystem Date [05/15/2008] selects field.System Memory 634 KBExtended Memory 1790 MBVideo Memory [256 MB]Quiet Boot: [Enabled]Network Boot: [Enabled]F12 Boot Menu: [Disabled]D2D Recovery: [Enabled]SATA Mode: [ACHI Mode]F1 Help ↑↓ Select Item F5/F6 Change Values F9 Setup DefaultsESC Exit ←→ Select Menu Enter SelectXSub-Menu F10 Save and Exit
