Acewell ACE-27 series User Manual
Also see for ACE-27 series: User manual
  |
Thank for purchasing an Acewell ATV/Motorcycle/Scooter computer. Thismanual is specially designed for the ACE-27xx/28xx series. Each model has 4-6LED indicators. Different models have different LED indicators; a fuel meter isoptional, but all other functions are the same. You may find that the photo abovehas a set of LED indicators different from your computer; the photo is forreference only.ATV ComputerFEATURESSPECIFICATIONSPower Input: 12VDC.Speed Sensor: No Contact Magnetic Sensor.Tachometer Input: CDI or Ignition-coil signal.Wheel Circumference Setting: 1mm - 3999 mm (1 mm increment)Operation Temperature: -10°C - +80°C (inner housing)Storage Temperature: -25°C - +85°C (inner housing)Fuel Sensor Resistance: +/-100Ω, 250Ω, 510Ω options or 1-7Bar-graphic(For models with fuel meter only)FUNCTIONSwww.acewell-meter.comIncludes analog and digital tachometer, speedometer(300km/h), trip meter, odometer, clock, averagespeedometer, maximum speedometer, riding timer andcumulative riding timer.Computer unit has 4-6 built-in LEDs for differentpurpose indicators.LCD has two rows of digital and one analogbar-graphic tachometer displays, with blue LEDbacklight.Odometer and cumulative riding timer measurementsare stored in memory, even when power is off.The computer's clock is always on, even when otherfunctions are power-off.Universal wheel circumference setting range of1-3999mm.Metric/ British system options.1 Second1 Minute9999H59'0.00'00"- 99:59'59"Riding TimeTotal TimeSPECIFICATIONS2.3-300KM/h (187.5M/h)MAX 2.3-300KM/h (187.5M/h)AVG 2.3-300KM/h (187.5M/h)0.0-999.9 Km (624.9 Miles)0 - 999999 Km (0.0- 624999 Miles)500-12,000 rpmBar TachometerOdometerTrip MeterMaximum Speed MeterSpeed MeterSymbolFUNCTIONS500 rpm1 Km or Miles0.1 Km or Miles0.1 KM/H or M/H0.1 KM/H or M/H0.1 KM/H or M/HINCREMENTS+/- 50PPM+/-1% or+/- 0.1(KPH/MPH)+/- 0.1%+/- 0.1%+/- 50PPMACCURACYAverage Speed Meter +/-1% or+/- 0.1(KPH/MPH)+/-1% or+/- 0.1(KPH/MPH)TTRTODOTRIP 1&2AVGMAXDigital Tachometer RPM 100-19,900rpm 100 rpmShift WarningMaximum Tachometer MAXRPMRPM 100-19,900rpm100-19,900rpm100 rpm100 rpmClock 0.00'00"- 24:59'59" 1 Second/1 Minute +/- 50PPMINSTALLATIONS & PARTSMain Unit MountingSpeed Sensor & Magnet MountingRPM Sensor Mounting2.1.7.3.4.6.5.8. ACE-2853Fixing Screw NutRubber PadWasherSpring WasherAttention：1.Align the center of the magnet toeither the sensor marking lineor the end of the sensor.2.Installing the sensor parallel tothe vibration direction creatingoptimal anti-vibration effect.3.Be sure the gap between the magnetand the sensor is within 8mm.Max8mmVibration DirectionsensorMax8mmVibration DirectionsensorCDI Ignition CoilRPM-INPUTEither One2-5 TurnsPANEL DESCRIPTIONS1. Bar Speed Scale 5. RESET Button2. Bar Speed 6. MODE Button3. 1st row display: Speedometer, 7. Fuel Meter Bar: (optional)Maximum Speed 8. LED indicator symbols4. 2nd row display: Other functions .Left-Direction Indicator/GreenMain-Beam Headlamp/BlueRight-Direction Indicator/GreenHazard Warning/ RedParking/GreenDirection Indicator/GreenEngine Oil/RedNeutral Gear/GreenReverse Gear/RedDrive Gear/GreenEngine Coolant Temperature/RedPDRNRear Fog Lamp/AmberTrailer Flashers/Green Engine "Not In Use"/ RedBAR RPM: Bar Graphic Tachometer1. The bar graphic tachometer reading is always displayed at the bar graph.2. Tachometer bar graphic displays up to 12,000 RPM.RPM: Digital Tachometer1. RPM is displayed in 2nd row.2. Digital tachometer displays up to 19,900 RPM.3. Tachometer signal picked up from either CDI or Ignition coil.Shift Warning RPM1. Function enables you to set up an RPM shift warning.2. Bar-graphic tachometer flashes when RPM reaches pre-set value, and stopsflashing after you shift gear.MAX RPM: Maximum Tachometer1. MAX RPM is displayed on 2nd row.2. Displays highest tachometer reading achieved after last RESET operation.SPD: Speed Meter1. Speed meter display is on 1st row of the screen.2. Displays speedometer reading up to 300.0 Km/H or 187.5 mph.MAX: Maximum Speed Meter1. MAX is displayed on 1st row.2. Displays highest speed achieved after last RESET operation.AVG: Average Speed Meter1. AVG is displayed on 2nd row.2. Calculates average speed from last RESET.TRIP 1 & 2: Trip Meter 1& 21. TRIP function registers cumulative trip distance from last RESET while bike isbeing ridden.2. Display is on 2nd row of screen.ODO: Odometer1. ODO registers cumulative distance traveled during motorbike operation.2. ODO data is stored in memory, even when power is off.RT: Riding Timer1. Calculates total operation time from last RESET.2. Count automatically begins with vehicle movement.TT: Total Riding Timer1. Calculates total operation time from the beginning of bike use.2. Count automatically begins with vehicle movement.3. TT data is stored in memory, even when power is off.12/24 hour ClockIt displays 12- or 24-hour current time.Fuel Meter (Only for models with the function)1. Has 7 bargraphic indicator of fuel status.2. Last bar flashes to indicate low fuel level.E 13 10R-0228111. Signal intensity from ignition coli is dependent on vehicle type.2. Circles 2-5 turns around ignition coil, with more turns creating steadilysignal, fewer turns creating weaker signal.3. The computer can use all type of ignition system, only if the RPM is notstable you must sometimes add the attached 1MOhm resistor in the wire ofthe RPM input.ACE-27xx/28xx series User's ManualEN 2015/05/12 |
Related manuals for Acewell ACE-27 series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine