Chapter 2: Using the Command Line Utility ● 12ARCCONF CommandsPerform the following functions from the command line:Note: In the online command syntax, <> indicates a required parameter and [] indicates anoptional parameter.arcconf atapasswordSets or clears the Secure Erase password for SATA drives. See arcconf task on page 27 for moreinformation about Secure Erase.SyntaxARCCONF ATAPASSWORD SET ...ARCCONF ATAPASSWORD CLEAR ...Parametersnew password|current password is the case-senstive password string.Channel/ID lists the space-delimited channel number and device number (ID) pairs for eachdrive on which to set or clear the password.ExamplesARCCONF ATAPASSWORD 1 SET uR8ryx 0 1ARCCONF ATAPASSWORD 1 CLEAR uR8ryx 0 1arcconf copybackEnables or disables the copyback feature, which attempts to keep drives in the original slotorder after rebuilds.SyntaxARCCONF COPYBACK ParametersController# is the controller numberOn enables the copyback featureOff disables the copyback featureARCCONF COMMANDSatapassword getlogs rescan setnamecopyback getsmartstats resetstatisticscounters setncqcreate getstatus romupdate setperformdatascrub getversion savesupportarchive setpowerdelete identify setalarm setprioritydriverupdate imageupdate setcache setstatefailover key setconfig setstatsdatacollectiongetconfig modify setmaxiqcache task