Adaptec 51245 User Manual

Also see for 51245: Quick start guide Quick start guide Installation and user guide Installation and user guide Quick start guide

Chapter 2: Using the Command Line Utility ● 20Channel# is the channel number for the device.Drive# is the device_ID (device number) for the device.Noprompt is an optional parameter that overrides the user prompt.ExampleARCCONF MODIFY 1 FROM 2 TO 2048 0 0 123 0 124 0 117arcconf rescanEnables the controller to check for the removal of any disk drives in the ready state and tocheck for the connection of any new disk drives to the controller. The command returns whenthe rescan is complete.SyntaxARCCONF RESCAN ParametersController# is the controller numberExampleARCCONF RESCAN 1arcconf resetstatisticscountersResets statistics counters for a controller. Use this command to clear the counters and createfresh statistics.SyntaxARCCONF RESETSTATISTICSCOUNTERS ParametersController# is the controller number.ExampleARCCONF RESETSTATISTICSCOUNTERS 1arcconf romupdateAllows new firmware and BIOS to be flashed to the controller. A reboot is required for the newfirmware to take effect.Note:1 This function is only supported in Windows and Linux.2 Be sure to copy the *.UFI update files from the CD and not from the BIOS/Firmwareupdate diskettes.SyntaxARCCONF ROMUPDATE ParametersController# is the controller number