Adaptec AFW-4300 Hardware Installation Manual

Contents

3Insert the AFW-4300 into the PCI expansion slot. Press downfirmly until the card clicks into place; then replace the slot coverscrew. When installed properly, the card should appear level withthe expansion slot, as shown below.Once the AFW-4300 is installed in your system complete thefollowing steps.Windows InstallationAfter physically installing the card into the PCI slot and replacingthe slot cover screw, replace the cover on your computer and thenreattach the power cord. Once this is done, power up thecomputer.During the operating system startup, the card will automaticallybe detected and Windows will load an embedded driver for thecard. If your system prompts you to restart the computer, do so.S TEP 4Depending on the tightness of the PCI slot,considerable force might be required to insert the card.NOTEC OMPLETING THE I NSTALLATIONS TEP 1S TEP 2