Chapter 10: Updating and Customizing ICP Storage Manager ● 1176 If you added systems, ICP Storage Manager prompts you to enter login credentials for theselected systems. In the Login to managed system window, enter a user name and passwordif security is enabled on the remote systems. Select Login to all selected systems with thisusername and password to use the same username/password combination for all selectedsystems. (You will be prompted to login to each remote system individually if you do notchoose this option.) Select Save username/password to use the same login credentials eachtime you start ICP Storage Manager.To add all selected systems to the Enterprise view without logging in, select Add allselected systems to managed system view without logging in. Choosing this option causesall other options to be grayed out.7 Click Connect. The wizard closes and the selected systems are added to the EnterpriseView.Note: ICP Storage Manager adds all selected systems to the Enterprise view even if login failson some systems. For those systems, try logging in again with different credentials.Changing Auto-Discovery SettingsAuto-discovery, in ICP Storage Manager, is enabled by default. The auto-discovery task runs inthe background each time ICP Storage Manager is started. You can disable auto-discovery ifdesired, and configure the auto-discovery settings described below.To change auto-discovery settings on a system:1 In the Enterprise View, select the local system.2 In the tool bar, click Configure, point to the system, then click General Settings .
