Adeunis RF sigfox DRY CONTACTS 868 User Manual

Contents

Adeunis RF sigfox DRY CONTACTS 868 User Manual Manual pdf 47 page image

ENsigfox DRY CONTACTS- Guide utilisateur / User guide version V1.2.047Page of 801.1. General description1. PRODUIT PRESENTATIONIMPORTANT NOTE: The sigfox DRY CONTACTS can only be started with a magnet.Description:• The ADEUNIS RF sigfox DRY CONTACTS is a ready-to-use radio transmitter enabling the user on one hand to transfer statuses and alarms on asigfox network and on the other to control relays via the same network.• This product meets the needs of users who require to remotely monitor (or control) simple on-off digital data: detection of door opening,presence, machine starting, warning, etc.• The use of the sigfox protocol allows you to integrate the sigfox DRY CONTACTS into any network that is already deployed.• Four digital inputs/outputs can be supported by a single sigfox DRY CONTACTS transmitter.• The product emits the data either periodically or in an event-related way on a change of state.• The configuration of the transmitter is accessible by the user via a micro-USB port, allowing in particular a choice of modes of transmission,periodicity or type of interface (input/output).• The sigfox DRY CONTACTS is powered by a replaceable internal battery.IMPORTANT NOTE: The sigfox DRY CONTACTS is delivered by default with OTAA configuration, allowing the user to declare his/her product to asigfox operator. For an ABP procedure, please contact our Sales Department with the necessary information.Composition of the packageThe product is supplied in a cardboard box containing the following items:top casing, electronic card, casing base plate,cable gland, 3 gland seals, 2 CBLZ 2.2 x 19mm screws, 2 Fischer SX4 plugs,10790 272 holes for passingcollars throughRail-DIN unlockinglever4 fastening holesCables outletpacking glandCasing baseCasing base detailAntenna