PCM-9388 User Manual 323.2.11 Set PasswordTo Establish Password1. Choose the Set Password option from the CMOS Setup Utility main menu andpress .2. When you see “Enter Password”, enter the desired password and press.3. At the “Confirm Password” prompt, retype the desired password, then press.4. Select Save to CMOS and EXIT, type , then .To Change Password1. Choose the Set Password option from the CMOS Setup Utility main menu andpress .2. When you see “Enter Password”, enter the existing password and press.3. You will see “Confirm Password”. Type it again, and press .4. Select Set Password again, and at the “Enter Password” prompt, enter the newpassword and press .5. At the “Confirm Password” prompt, retype the new password, and press.6. Select Save to CMOS and EXIT, type , then .Note! To enable this feature, you should first go to the Advanced BIOS Fea-tures menu, choose the Security Option, and select either Setup or Sys-tem, depending on which setting you want password protected.Selecting “Setup” requires a password only to enter Setup. Selecting“System” requires the password either to enter Setup or to boot the sys-tem. A password may be at most 8 characters long.