Aviom D400-Dante User Manual
                                                     | |
Contents
| 
11D400 A N D D 400-D A Nte A - Net D iStRiBUtoRS U S eR G U i D eA-Net In, D400The A-N et IN port is available only on the D400 A-Net Distributor. It can accept the A-Net digital datacoming from the A-N et O ut port of any Pro16 or Pro16e device. Pro16 data has a maximum of 16 channels;Pro16e data has a maximum of 64 total channels.The A-Net digital data connected to the D400 can come from:• a single Pro16 analog input module such as the AN-16/i-M Mic Input Module• a single Pro16e analog input module such as the AN-16/i v.2 Input Module• a maximum of four AN-16/i v.2 Input Modules cascaded together• one Pro16 analog input module and up to three AN-16/i v.2 Input Modules• a single Pro16 A-Net console card• one Pro16 console card and up to three AN-16/i v.2 Input Modules• the A-Net Out from another A-Net Distributor• a single Pro16 output from a Pro64 ASI A-Net System Interface• a single Pro16 output from a Pro64 ASI A-Net System Interface and up to three AN-16/i v.2Input ModulesDante Connections, D400-DanteThe Dante interface on the D400-Dante A-Net Distributor has two gigabit network ports labeled PrImAryand S ecONdAry. The Dante S ecONdAry port can be configured to be a pass-through port or a redundant copyof the PrImAry port. The D400-Dante supports sample rates of 44.1kHz and 48kHz coming from the Dantenetwork. No sample rate converters are available on the D400-Dante.SyncPower1 – 16Stereo / Mono17 – 321 2 3 4 PrimaryOut5 6 7 8 SecondaryD400eThe D400-Dante has two Dante jacks, Primary and Secondary. |
Related manuals for Aviom D400-Dante
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine