Aviom D400-Dante User Manual
                                                     | |
Contents
| 
31D400 A N D D 400-D A Nte A - Net D iStRiBUtoRS U S eR G U i D eDigital Console CardThis system uses a single console card and one D400 A-Net Distributor. A compatible Pro16 digital consolecard from any of Aviom’s technology partners may be substituted for the Y1 Yamaha card shown in thediagram. Connect A-N et O ut on the console card to A-N et IN on the D400 with a standard Cat-5 cable.OutSyncPower1 2 3 45 6 7 81 – 16Stereo / Mono17 – 32InDefeat Stereo Switches1173349A-Net Offset Base SlotD400eA-net out from the console card is connected to A-net In on the D400.The A-N et OFFSet BASe S lOt DIP switches on the D400 should be set to the default slots 1-16 setting. Assignstereo links as needed. Stereo links may be created on the console card or on the D400.About A-Net Offset Base SlotThe A-Net Offset Base Slot DIP switches on the D400 are used to select which bank of 16 channels shouldbe mapped onto the Personal Mixer’s channel buttons. For 16-channel systems, these DIP switches shouldbe set to Slot range 1, both switches down. Setting the DIP switches to any other range will route non-existent network channels to the Personal Mixers.Out1 2 3 45 6 7 81 – 16Stereo / Mono17 – 32InDefeat Stereo Switches1173349A-Net Offset Base SlotSet the Base Slot to “1” for 16-channel systems.Stereo LinksThe D400 and D400-Dante have a set of front-panel Stereo Link DIP switches that are capable of linkingadjacent odd/even channel pairs in the A-Net stream. You have the option of using the stereo link switcheson the network’s input device (analog input module or digital console card) or on the D400. If the stereolinks are set at the network’s input device, set the deFeAt StereO SwItcheS DIP switch in the down position;links from the D400’s front panel are ignored. |
Related manuals for Aviom D400-Dante
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine