AXIS Q6055-C PTZ Network CameraAbout system optionsarp -s 192.168.0.125 00:40:8c:18:10:00 tempping -s 408 192.168.0.125Windows syntax (this may require that you run the command prompt as an administrator)arp -s address> number>ping -l 408 -t address>Windows example (this may require that you run the command prompt as an administrator)arp -s 192.168.0.125 00-40-8c-18-10-00ping -l 408 -t 192.168.0.1254. Check that the network cable is connected and then restart the product by disconnecting and reconnecting power.5. Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar.6. Open a browser and type http:// address> in the Location/Address field.For other methods of assigning the IP address, see the document Assign an IP Address and Access the Video Stream on Axis Supportweb at www.axis.com/techsupNote• To open a command prompt in Windows, open the Start menu and type cmd in the Run/Search field.• To use the ARP command in Windows 8/Windows 7/Windows Vista, right-click the command prompt icon and selectRun as administrator.• To open a command prompt in Mac OS X, open the Terminal utility from Application > Utilities.AXIS Video Hosting System (AVHS)AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible fromany location. For more information and help to find a local AVHS Service Provider go to www.axis.com/hostingThe AVHS settings are configured under System Options > Network > TCP IP > Basic. The possibility to connect to an AVHS serviceis enabled by default. To disable, clear the Enable AVHS box.One-click enabled - Press and hold the product’s control button (see Hardwareoverviewonpage 7 ) for about 3 seconds to connect toan AVHS service over the Internet. Once registered, Always will be enabled and the Axis product stays connected to the AVHS service.If the product is not registered within 24 hours from when the button is pressed, the product will disconnect from the AVHS service.Always - The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered the product willstay connected to the service. This option can be used when the product is already installed and it is not convenient to use theone-click installation.AXIS Internet Dynamic DNS ServiceAXIS Internet Dynamic DNS Service assigns a host name for easy access to the product. For more information, see www.axiscam.netTo register the Axis product with AXIS Internet Dynamic DNS Service, go to System Options > Network > TCP/IP > Basic. UnderServices, click the AXIS Internet Dynamic DNS Service Settings button (requires access to the Internet). The domain name currentlyregistered at AXIS Internet Dynamic DNS service for the product can at any time be removed.NoteAXIS Internet Dynamic DNS Service requires IPv4.Advanced TCP/IP SettingsDNS ConfigurationDNS (Domain Name Service) provides the translation of host names to IP addresses. The DNS settings are configured under SystemOptions > Network > TCP/IP > Advanced.52
