AXIS Q6055-C PTZ Network CameraAbout system optionsCrash Report - Generates an archive with debugging information. The report takes several minutes to generate.AdvancedScriptingScripting allows experienced users to customize and use their own scripts.NONONOTICETICETICEImproper use may cause unexpected behavior and loss of contact with the Axis product.Axis strongly recommends that you do not use this function unless you understand the consequences. Axis Support does not provideassistance for problems with customized scripts.To open the Script Editor, go to System Options > Advanced > Scripting. If a script causes problems, reset the product to itsfactory default settings, see page 60.For more information, see www.axis.com/developerFile UploadFiles, for example webpages and images, can be uploaded to the Axis product and used as custom settings. To upload a file, goto System Options > Advanced > File Upload.Uploaded files are accessed through http:// address>/local// name> where is theselected user group (viewer, operator or administrator) for the uploaded file.Plain ConfigPlain Config is for advanced users with experience of Axis product configuration. Most parameters can be set and modified fromthis page.To open Plain Config, go to System Options > Advanced > Plain Config. Axis Support does not provide assistance with this feature.How to reset to factory default settingsImportantReset to factory default should be used with caution. A reset to factory default will reset all settings, including the IPaddress, to the factory default values.NoteThe installation and management software tools are available from the support pages on www.axis.com/techsupTo reset the product to the factory default settings:1. Press and hold the control button and the power button for 15–30 seconds until the status LED indicator flashes amber.See Hardware overview on page 7 .2. Release the control button but continue to hold down the power button until the status LED indicator turns green.3. Release the power button and assemble the product.4. The process is now complete. The product has been reset to the factory default settings. If no DHCP server is available onthe network, the default IP address is 192.168.0.905. Using the installation and management software tools, assign an IP address, set the password and access the video stream.60
