Axis 1650 Setup Instructions

Also see for 1650: Setup instructions User manual Setup instructions User manual

Contents

contenuto della confezione

Page 14 AXIS 1650 Set-up Instructions4. Right-click the device you would like to use (example:WIA Canon MF3110) and select Properties.5. Select Events and select the event Canon MF3110 ScanButton.6. Under Actions, select the option Start this program andselect MF ToolBox in the list.7. Click [OK].Now you have prepared your computer for scanning via AXIS 1650.Note: These steps are just needed prior to the first scanning from the computer.Starting a Scan from the Canon DeviceWhen you have established a connection between your computer and the scanner with AXISScanClient, place the object to be scanned on the scanner flatbed.1. If the Canon device is in Energy Save mode, press its [Energy Saver key].2. Press [Scan] on the Canon device.3. Press [Start] on the Canon device.4. The scanning will start.5. When ready, remove the scanned object from the flatbed and walk back to yourcomputer.6. Close the receiving program on your computer and end the scanning session (see below).