Axis 1650 Setup Instructions

Also see for 1650: Setup instructions User manual Setup instructions User manual

Contents

contenuto della confezione

AXIS 1650 Set-up Instructions Page 15 ENGLISHNote: When waking up from Power Off or Energy Save mode, the Canon device needs sometime (from 30 seconds to a few minutes) to adjust the light and the scanner to produceoptimum scans. Press [Start] repeatedly until scanning starts.Starting a Scan from your ComputerWhen you have established a connection between your computer and the scanner with AXISScanClient, place the object to be scanned on the scanner flatbed.On your computer, start the receiving program (e.g.Canon MF Toolbox — Scan Function). Click [Save] toopen the Save dialog.Scanning1. In the Save dialog, click [Start] to startscanning.When ready, close the Save dialog and theCanon MF Toolbox. End the scanning session(see below) and remove the scanned object fromthe flatbed.Ending a Scanning SessionEnd a scanning session by clicking [Disconnect] onthe AXIS ScanClient.The message line will change to Disconnected.Note: The scanning session will automatically end and the channel will be disconnected bydefault after 5 minutes of inactivity.