Axis 206 User Manual

Also see for AXIS 206: Quick installation guide Specifications Product guide Specifications Specification

Axis 206 User Manual Manual pdf 15 page image

14AXIS 206 - Install the AXIS 206/206MManual Installation with ARP/Ping1. Acquire an unused IP address for the AXIS 206/206M. This IP address must be on thesame subnet as your computer.2. Locate the serial number (S/N) on the label on the camera’s rear panel.3. From a computer on your network, open a Command Prompt (in Windows: from theStart menu, select Run... and type cmd in the field. Click OK).4. As appropriate for your operating system, enter the following commands:5. Check that the network cable is connected (or that the wireless connection isfunctioning). Start/restart the camera by disconnecting and reconnecting the powercable.6. Close the Command prompt when you see ‘Reply from 192.168.0.125: ...’7. The IP address has been set when the Power indicator is permanently lit and theNetwork indicator flashes intermittently.8. Start your browser, enter the IP address of the camera in the Location/Address field andpress Enter on your keyboard. See below for instructions on how to set the password.Note:Windows syntax: Windows example:arp -s Number>ping -l 408 -t Address>arp -s 192.168.0.125 00-40-8c-18-10-00ping -l 408 -t 192.168.0.125UNIX/Linux/Mac syntax: UNIX/Linux/Mac example:arp -s tempping -s 408 Address>arp -s 192.168.0.125 00:40:8c:18:10:00 tempping -s 408 192.168.0.125After installation, the AXIS 206 can be assigned a DNS name by using the AXIS Dynamic DNS Service.See page 11.