![Axis 223M User Manual Manual pdf 9 page image](https://manuals-archive2.s3.amazonaws.com/2678844/10b4dcdf024114daf40df5e30ba8a55b9f.jpg)
9AXIS 223M - Accessing the CameraSetting the root password1. When accessing the camerafor the first time, theConfigure Root Passworddialog appearsNote: Before you enter yourpassword at this point, you cansecure configuration of the rootpassword via HTTPS by creating aself-signed certificate. To do so, clickthe Create self-signed certificate...button in the Create Certificatewindow, and then proceed asfollows.2. Enter a password and thenre-enter it, to confirm the spelling. Click OK.3. The Enter Network Password dialog will appear. Enter the User name: rootNote: The default administrator user name root is permanent and cannot bedeleted or altered.4. Enter the password as set in step 2 above, and click OK. If the password is lost,the camera must be reset to the factory default settings. See Resetting to thefactory default settings, on page 48.5. If required, click Yes to install the AXIS Media Control (AMC). You will needadministrator rights on the computer to do this.Accessing the camera from the InternetOnce installed, the camera is accessible on your local network (LAN). To access the camerafrom the Internet you must configure your router/firewall to allow incoming data traffic.For security reasons this is usually done on a specific port. Please refer to thedocumentation for your router/firewall for further instructions.For more information, please visit the AXIS Internet Dynamic DNS Service atwww.axiscam.net or, for Technical notes on this and other topics, visit the Axis SupportWeb at www.axis.com/techsupAdjusting the image and focusTo adjust the position of the lens:1. Open the Live View page in your web browser.2. Check the image in the Live View page, and move the lens to the desired position.To focus the AXIS 223M, follow the instructions below.